Farish Mark 1s and 2s - 2mm FS conversion

The Association shop is out of stock of the 15.2mm axle length 7mm diameter coach wheels which (I think) should be the choice for converting new-style Farish Mark 1s.

So, I have a cunning plan. I have stock of 12 axles worth of 14.8mm axle length wheels which fit the old-style Farish Mark 1 bogies. They're not exactly a B1 but they aren't too far away. And with a little hacking / adaptation of the coupling pocket they nicely steer the new-style Mark 1 close coupling mechanism, which I'm tempted to keep - perhaps with some kind of homemade hook and pin or bar coupling between most of the vehicles and DG's just on the ends of each set. Pics of this conversion to follow.

I wanted a couple of coaches to get running on my test track / other folks layouts quickly though, so I thought I'd do the Farish Mark 2s first.

I browsed through the Association shop product list and ordered some 6mm diameter plain disc wheels on the 15.2mm axles (recommended for Farish in the shop list). Unfortunately the axles are too long. Checking with a micrometer the Farish axles are about 14.0mm. I hadn't realised but apparently Farish are now using a variety of axle lengths in different models. I'm not quite sure where this leaves me other than with 20 axles worth of wheels I can't immediately think of a use for!

Over on RMWeb's 2mm FS section, Chris Higgs has suggested using the 2-022 wheels which are on a 14.2mm axle and Jerry Clifford said he would advise either using the wheels on 15.2 on something else and either getting the Farish wheels turned down or popping some bearings in the Farish bogies so they suit a different axle length. Another option would be to use "standard" 12.25mm axles with brass bearings mounted at a suitable spacing into the bogie frames (Izzy suggested using thin plasticard shims to ensure the spacing is right.

Needs some thought then!

Resurrecting some 2mm FS Projects

Now that I've tidied the snug /railway room up, I've restarted work on a lowfit and an ex LNER Toad E. These are N gauge kits but receiving 2mm FS wheels and DG couplings for a new project, but they were started in the mid-90s when I was at Manchester MRS and (very loosely) involved with the iconic Chee Tor layout.

Lowfit on Peco chassis. The buffers have been replaced with the old 2mm Association white metal castings (these parts are more robust lost wax brass castings these days). I've filled in the gap in the buffer beams where the coupling would have been and now I've laid in some Squadron Green putty to level out the areas where the DG couplings will be epoxied. Next step will be to file this smooth.

Brake van chassis with new centre section of the headstock in 60 thou x 30 thou styrene. Next step is filler as for the lowfit, then a little work to the body. You can see the roof which has had separate torpedo vent castings added already.

Class 40 012 Aureol on the S&C 14/05/83

Just found this gem, not only Aureol on the S&C but also 27004 on some kind of special at Appleby. Anyone any idea what that was?



Some real modelling inspiration there :-)